[1] Yang, H., Jiang, X., Li, B., Yang, H. J., Miller, M. A., Yang, A., Dhar, A., & Pavletich, N. (2017). Structural mechanisms of mTORC1 activation by RHEB and inhibition by PRAS40. Nature, 552, 368-373. https://doi.org/10.1038/nature25023
[2] Banerjee, T., Gottschling, K., Savasci, G., Ochsenfeld, C., & Lotsch, B. (2018). H2 evolution with covalent organic framework photocatalysts. ACS Energy Letters, 3, 400-409. https://doi.org/10.1021/acsenergylett.7b01123
[3] Zidan, A., Khairalla, M., Abdrabou, A., Khalifa, T., Shaban, K., Abdrabou, A., Shatshat, R., & Gaouda, A. (2017). Fault detection, isolation, and service restoration in distribution systems: State-of-the-art and future trends. IEEE Transactions on Smart Grid, 8, 2170-2185. https://doi.org/10.1109/TSG.2016.2517620
[4] Worthy, A., Grosjean, A., Pfrunder, M. C., Xu, Y., Yan, C., Edwards, G., Clegg, J., & McMurtrie, J. C. (2018). Atomic resolution of structural changes in elastic crystals of copper(II) acetylacetonate. Nature Chemistry, 10(1), 65-69. https://doi.org/10.1038/nchem.2848
[5] Jousset, P., Reinsch, T., Ryberg, T., Blanck, H., Clarke, A., Aghayev, R., Hersir, G., Henninges, J., Weber, M., & Krawczyk, C. (2018). Dynamic strain determination using fibre-optic cables allows imaging of seismological and structural features. Nature Communications, 9. https://doi.org/10.1038/s41467-018-04860-y
[6] Kastha, D., & Bose, B. K. (1994). Investigation of fault modes of voltage-fed inverter system for induction motor drive. IEEE Transactions on Industry Applications, 30(4), 1028-1038. https://doi.org/10.1109/28.297920
[7] Bolognani, S., Zordan, M., & Zigliotto, M. (2000). Experimental fault-tolerant control of a PMSM drive. IEEE Transactions on Industrial Electronics, 47(5), 1134-1141. https://doi.org/10.1109/41.873223
[8] de Araujo Ribeiro, R. L., Jacobina, C. B., Da Silva, E. R. C., & Lima, A. M. N. (2004). Fault-tolerant voltage-fed PWM inverter AC motor drive systems. IEEE Transactions on Industrial Electronics, 51(2), 439-446. https://doi.org/10.1109/TIE.2004.825284
[9] Song, Y., & Wang, B. (2013). Analysis and experimental verification of a fault-tolerant HEV powertrain. IEEE Transactions on Power Electronics, 28(12), 5854-5864. https://doi.org/10.1109/TPEL.2013.2245513
[10] Zhang, W., Xu, D., Enjeti, P. N., Li, H., Hawke, J. T., & Krishnamoorthy, H. S. (2014). Survey on fault-tolerant techniques for power electronic converters. IEEE Transactions on Power Electronics, 29(12), 6319-6331. https://doi.org/10.1109/TPEL.2014.2304561
[11] Hoang, K., Zhu, Z. Q., Foster, M. P., & Stone, D. A. (2010). Comparative study of current vector control performance of alternate fault tolerant inverter topologies for three-phase PM brushless ac machine with one phase open-circuit fault. In Power Electronics, Machines and Drives (PEMD 2010), 5th IET International Conference on (pp. 1-6). IET. https://doi.org/10.1049/cp.2010.0052
[12] Campos-Delgado, D., Espinoza-Trejo, D., & Palacios, E. (2008). Fault-tolerant control in variable speed drives: A survey. IET Electric Power Applications, 2(2), 121-134. https://doi.org/10.1049/iet-epa:20070203
[13] Fu, J.-R., & Lipo, T. A. (1993). A strategy to isolate the switching device fault of a current regulated motor drive. In Industry Applications Society Annual Meeting, 1993., Conference Record of the 1993 IEEE (pp. 1015-1020). IEEE.
[14] Liu, T.-H., Fu, J.-R., & Lipo, T. A. (1993). A strategy for improving reliability of field-oriented controlled induction motor drives. IEEE Transactions on Industry Applications, 29(5), 910-918. https://doi.org/10.1109/28.245714
[15] Welchko, B. A., Lipo, T. A., Jahns, T. M., & Schulz, S. E. (2004). Fault tolerant three-phase AC motor drive topologies: A comparison of features, cost, and limitations. IEEE Transactions on Power Electronics, 19(4), 1108-1116. https://doi.org/10.1109/TPEL.2004.830074
[16] Van Der Broeck, H. W., & Skudelny, H.-C. (1988). Analytical analysis of the harmonic effects of a PWM AC drive. IEEE Transactions on Power Electronics, 3(2), 216-223. https://doi.org/10.1109/63.4352
[17] Klima, J. (2005). Time and frequency domain analysis of fault-tolerant space vector PWM VSI-fed induction motor drive. IEE Proceedings - Electric Power Applications, 152(4), 765-774. https://doi.org/10.1049/ip-epa:20045099
[18] Alavije, H. S., & Akhbari, M. (2011). Investigation of induction motor drive behavior in low-cost fault tolerant control for electric vehicles. In Power Engineering and Optimization Conference (PEOCO), 2011 5th International (pp. 176-181). IEEE.
[19] de Rossiter Correa, M. B., Jacobina, C. B., da Silva, E. R. C., & Lima, A. M. N. (2006). A general PWM strategy for four-switch three-phase inverters. IEEE Transactions on Power Electronics, 21(6), 1618-1627. https://doi.org/10.1109/TPEL.2006.882964
[20] Sobanski, P., & Orlowska-Kowalska, T. (2014). Analysis of space vector modulation technique in inverter-fed fault-tolerant induction motor drive. In Power Electronics and Motion Control Conference and Exposition (PEMC), 2014 16th International (pp. 1024-1029). IEEE. https://doi.org/10.1109/EPEPEMC.2014.6980643
[21] Li, Z., Zhang, M., Guo, Y., & Zhang, X. (2017). Overmodulation strategy for four-switch three-phase inverter based on virtual voltage vector. In Control Conference (CCC), 2017 36th Chinese (pp. 7364-7369). IEEE.
[22] Blaabjerg, F., Neacsu, D. O., & Pedersen, J. K. (1999). Adaptive SVM to compensate DC-link voltage ripple for four-switch three-phase voltage-source inverters. IEEE Transactions on Power Electronics, 14(4), 743-752. https://doi.org/10.1109/63.774214
[23] Kim, J., Hong, J., & Nam, K. (2009). A current distortion compensation scheme for four-switch inverters. IEEE Transactions on Power Electronics, 24(4), 1032-1040. https://doi.org/10.1109/TPEL.2008.2011552
[24] Lee, D.-M., Park, J.-B., & Toliyat, H. A. (2013). A simple current ripple reduction method for B4 inverters. Journal of Electrical Engineering and Technology, 8(5), 1062-1069. https://doi.org/10.5370/JEET.2013.8.5.1062
[25] Wang, R., Zhao, J., & Liu, Y. (2011). A comprehensive investigation of four-switch three-phase voltage source inverter based on double Fourier integral analysis. IEEE Transactions on Power Electronics, 26(10), 2774-2787. https://doi.org/10.1109/TPEL.2011.2119381
[26] Kashif, S. A. R., Saqib, M. A., & Zia, S. (2011). Implementing the induction-motor drive with four-switch inverter: An application of neural networks. Expert Systems with Applications, 38(9), 11137-11148. https://doi.org/10.1016/j.eswa.2011.02.159
[27] El Badsi, B., Bouzidi, B., & Masmoudi, A. (2013). DTC scheme for a four-switch inverter-fed induction motor emulating the six-switch inverter operation. IEEE Transactions on Power Electronics, 28(7), 3528-3538. https://doi.org/10.1109/TPEL.2012.2225449
[28] Sobanski, P., & Orlowska-Kowalska, T. (2015). Predictive flux and torque control of induction motor drive under post-fault operation of three-phase voltage inverter. In Industrial Technology (ICIT), 2015 IEEE International Conference on (pp. 2333-2338). IEEE. https://doi.org/10.1109/ICIT.2015.7125442
[29] Zhou, D., Zhao, J., & Liu, Y. (2015). Predictive torque control scheme for three-phase four-switch inverter-fed induction motor drives with DC-link voltages offset suppression. IEEE Transactions on Power Electronics, 30(6), 3309-3318. https://doi.org/10.1109/TPEL.2014.2338395
[30] Zhou, D., Li, X., & Tang, Y. (2018). Multiple-vector model-predictive power control of three-phase four-switch rectifiers with capacitor voltage balancing. IEEE Transactions on Power Electronics, 33(7), 5824-5835. https://doi.org/10.1109/TPEL.2017.2750766
[31] Zeng, Z., Zheng, W., & Zhao, R. (2017). Performance analysis of the zero-voltage vector distribution in three-phase four-switch converter using a space vector approach. IEEE Transactions on Power Electronics, 32(1), 260-273. https://doi.org/10.1109/TPEL.2016.2532477
